 |
LNL-1100 Input Control Module
- Acknowledges critical alarm points in monitored areas of ReadykeyPRO system
- Sixteen software configurable inputs
- Two configurable forms
- LNL-1100 communicates with the LNL-500 via 2- or 4-wire RS-485 configurations
- Supports normally open, normally closed, supervised, and non-supervised circuits
|
 |
LNL-1200 Output Control Module
- Sixteen configurable output relays plus status LEDs
- Communicates with the LNL-500 via 2- or 4-wire RS-485 configurations
- Includes dedicated tamper and power failure input contacts
|
|
 |
LNL-1300 Single Reader Interface Module
- Communications link between the ISC and attached card reader
- Compatible with pin pads or access control card readers
- Works with pin pad readers that use standard Wiegand Data1/Data0 or Clock/Data reader communications
- Door and Request-to-Exit (REX) inputs
- One lock output relay
- One auxiliary output relay
- Communicates with the LNL-500 via 2-wire RS-485 configuration
|
 |
LNL-1320 Dual Reader Interface Module
- Attaches to specific card reader devices; communications link between the ISC and card reader
- Compatible with pin pads or access control card readers
- Works with pin pad readers that use standard Wiegand Data1/Data0 or Clock/Data reader communications
- Two Request-to-Exit (REX) inputs Normally Open (N/O)
- Two door inputs Normally Closed (N/C)
- Two software configurable auxiliary inputs per reader
- One dedicated lock output per reader
- Two software configurable auxiliary outputs per reader
- Communicates with the LNL-500 via 2- or 4-wire RS-485 configurations
|
 |
LNL-4000 Multiplexer
- Provides 2-way communication protocol conversion and connection to alternative devices
- Extends effective distance between ISC and as many as four 2-wire RS-232 ports
- Accepts either AC or DC input power
- Jumper selectable RS-485 onboard termination
- Support for either 2- or 4-wire topologies
|
 |
LNL-8000 Star Multiplexer
- Provides 2-way communication protocol conversion and connection to alternative devices
- Extends effective distance between ISC and downstream devices
- Add up to 8 devices; connect 4 multiplexers and up to 32 devices
- Host communications at 38.4 kbps direct wire (RS-232/RS-485 multi-dropped)
- Jumper selectable RS-485 onboard termination
- Support for either 2- or 4-wire topologies
- Designed for retrofit and star wiring configurations
- Status LEDs for heartbeat, upstream and downstream communications
|
Hardware Modules
