Bosch Smoke Detectors

2005 Perfect 10 Honorable Mention Consulting Specifying & Engineering	The F220-P Series Photoelectric Smoke Detectors scatter light using a pulsed infrared source operating with a gated, high-speed, photodiode infrared sensor. The symmetry of the optical chamber allows 360° uniform smoke entry while it minimizes external light entry. By using low-current electronic circuitry, these detectors can be connected to a wide range of power source circuits. The Model F220-PTH adds a heat sensor option. As a temperature rise is detected, the photoelectric chamber becomes more sensitive. The heat sensor can also initiate an alarm if the ambient temperature exceeds +135°F (+57°C). The Model F220-PTHC includes both heat and carbon monoxide sensors. All three models are UL Listed, open-area photoelectric smoke detectors designed for use with commercial fire protective signaling systems and household fire warning systems (see NFPA 72, the National Fire Alarm Code). Head only; needs base. F220-P Smoke Detector and F220-PTH Photoelectric Smoke Detector with Heat Sensor Two- or four-wire bases Can be used with 12 VDC or 24 VDC systems 30 ft (9 m) spacing Clean chamber without removal or disassembly CleanMe® signaling capability Sensitivity readout on detector  F220-PTHC Photoelectric Smoke Detector with +135°F (+57°C) Heat and Carbon Monoxide Sensors Includes all of the above features plus: CO-sensor, heat-sensor enhanced detection chamber Detector chamber compensates for dust build-up
	The FCP-500 Photoelectric Smoke Detectors are UL Listed, open area photoelectric smoke detectors for use with commercial fire protective signaling systems and household fire warning systems (see NFPA 72, the National Fire Alarm Code). The FCP-500 series smoke detectors satisfy the most demanding aesthetic requirements with their ultra-low profile design, flush ceiling mounting, and color options. This model is available as a photoelectric smoke detector or as a multi-sensor detector with an additional CO sensor. Each type is offered in white or transparent with color inserts. FCP-500 Conventional Flush-Mount Smoke Detectors Modern, ultra-low profile design Smooth, easily-cleaned detector surface Four-wire technology Usable with 12 VDC or 24 VDC systems Optional carbon monoxide (CO) sensor for false alarm reduction FCA-500-E Base with integrated end-of-line (EOL) relay       2004 Design Plus Light Building Award Design Council 2005 Editors Choice     Top 100 Products Buildings Magazine 2005 Detektor Plusz Award 2006 Winner Fire Detection/Prevention SIA New Product Showcase
	The D263 and D273 Series Smoke Detectors are UL Listed and work with commercial fire protective signaling and household fire warning systems. All models detect smoke particles produced during wood, paper, and fabric combustion. During a fire, smoke particles reflect light onto the photodiode of the D263 Series models. When the photodiode measurements exceed the alarm threshold, the detector signals an alarm condition. After the alarm condition clears, interrupt power at the control panel to reset the detector. The D273 Series Detector models use an infrared (IR) LED light source and a silicon photodiode to measure light in a chamber. A fine screen covers the chamber to reduce dust accumulation, deter insects, and reduce nuisance alarms. D263 Series Photoelectric Smoke and Smoke/Heat Detectors 12 V or 24 V input Designed for commercial or residential use Light emitting diodes (LEDs) indicate the status of the chamber, power, and alarm Removable terminal block to simplify wiring connections Cable connection point for voltmeter sensitivity test Trim Plate TP280 for retrofit and remodeling purposes D273 Series Photoelectric Smoke and Smoke Heat Detectors All of the above features plus 12 VDC or 24 VDC input Four-wire applications
	The D285 and D285TH detector heads sense the large smoke particles that typically result from wood, paper, and fabric combustion. The D285TH smoke detector also has a +135°F (+57°C) fixed temperature heat sensor. Use these models in areas where the ambient temperature does not exceed +100°F (+38°C). These detectors are compatible with 2- or 4-wire, 12 VDC or 24 VDC circuits. Addressable bases for use on the POPEX bus are also available. D285 Series Photoelectric Smoke Detector Heads (12/24 VDC) Modular design Commercial or residential applications Two-wire or four-wire application, depending on base Chamber Check® rapid-flash LED sends contaminated chamber reports Flashing LED power indicator Steady-on LED alarm indicator
	The D286 Ionization Smoke Detector employs the ionization principle to identify smoke. When air enters the detector's internal sensing chamber, it becomes ionized. Once ionized, the air becomes conductive, allowing an electrical current to flow between two charged electrodes within the sensing chamber. If smoke enters the chamber, smoke particles reduce the conductivity of the air, which generates an alarm when a pre-determined conductivity level is reached. D286 Ionization Smoke Detector Head Interchangeable 2-wire and 4-wire bases Low operating current Flashing LED power indicator, steady-on LED alarm indicator Low profile design 12 or 24 VDC operation Designed for commercial or residential use
	The D265AW Photoelectric Smoke Detector detects the large smoke particles that typically result from wood, paper, and fabric combustion. Offices, warehouses, hotels and health care facilities are environments generally specified for photoelectric detectors. This detector has two components: the detector base and the detector head. The base is permanently attached and wired to a back box. The interchangeable heads quickly detach for replacement and cleaning without affecting circuit wiring. The D265AW Detector Head attaches to the D261AW Detector Base. D265AW Photoelectric Smoke Detector Head 12 V or 24 V inputs Mounts on low profile 6 in. (15 cm) base Easy head removal for cleaning and servicing Maintenance-free operation Built in sensitivity test Steady-on LED alarm indicator
	The D281A Ionization Smoke Detector is UL Listed. It detects smoke particles while tolerating conditions of extreme humidity, temperature, vibration, and electromagnetic interference. Use the D281A Detector in applications such as plenum areas or raised compartments beneath floors. D281A Ionization Smoke Detector Removable, non-polarized, 24 VDC head is easy to install, clean, and service Compatible with assorted low-profile, tamper-resistant, 2- and 4-wire bases Dual chamber design
	The D282A and D283A detectors sense the large smoke particles that typically result from wood, paper, and fabric combustion. The D283A is a smoke detector that also has a +135°F (+57°C) fixed temperature heat sensor. Use in areas where the ambient temperature does not exceed +100°F (+38°C). These detectors are compatible with 24 VDC circuits. D282A/D283A Photoelectric Smoke Detector Heads 24 VDC input Mounts on low-profile base Easy head removal for cleaning and servicing Two- and four-wire base options Remote annunciation Tamper-resistant locking base
	The D296 and D297 Projected Beam Smoke Detectors are used in clear open structures such as arenas, atriums, auditoriums, ballrooms, churches, factories, museums, and warehouses. Each detector consists of a transmitter, a receiver, and a remote annunciation plate. Because the transmitter and receiver typically mount on the ceiling or high on walls or columns, they provide an effective and unobtrusive means of supervising public areas for fire protection. The D306 Remote Indicator Plate, included with the D296 or D297 Detector, provides a convenient means of verifying detector status. Install it anywhere within 100 ft (30 m) of the beam receiver. The D306 has LEDs to indicate normal, trouble, and alarm conditions, and test points to monitor the detector circuit. D296 (24 V) and D297 (12 VDC) Series Projected Beam Smoke Detectors Operates over distances between 30 ft (9 m) and 350 ft (107 m) Six levels of switch-selectable sensitivity Built-in alignment sights and tamper protection Automatic range adjustment, signal synchronization, and contamination adjustment Remote indicator plate annunciates voltage, trouble, and alarm conditions Switch-selectable alarm signal delay
	The RF280THS Wireless Photoelectric Smoke Detector is an open-area wireless smoke detector designed for use with commercial fire protective signaling and household fire warning systems. The LED indicates alarm, readiness, and testing via its frequency of blinking. The patented chamber design provides superior immunity to false alarms caused by dust. These detectors have an integral 135°F (57°C) heat sensor designed for use with commercial and household fire warning systems. The RF280THS transmits at a frequency of 304.00 MHz. RF280THS Wireless Smoke Detector 135°F (57°C) heat sensor Internal 85 dB sounder Superior dust immunity Exclusive Chamber Check self diagnostics Factory programmed transmitter ID for quick and simple transmitter enrollment Field replaceable smoke chamber
	Use the D306 Remote Indicator Plate with the D296/D297 Long-Range Beam Smoke Detectors and the D340 Series Duct Smoke Detector Housings. This plate has LEDs to indicate the detector's status and test points to read the sensitivity voltage. D306 Remote Indicator Plate Highly visible LED indicators Sensitivity voltage test point Easy to mount and wire Attractive faceplate
	Use the D307 Remote Test and Indicator Plate with the D296/D297 Long-Range Beam Smoke Detectors and the D340 Series Duct Smoke Detector Housings. This plate has LEDs to indicate the detector's status, test points to read the signal voltage, and a key¬operated test switch to test or reset the detector. D307 Remote Test and Indicator Plate Highly visible LED indicators Sensitivity voltage test point Key-operated remote test and reset switch Easy to mount and wire