Fire Alarm Control Panels

	The D8024 and D10024A are advanced analog fire alarm control panels that identify points using intelligent, addressable devices. On the front, light-emitting diodes (LEDs) show power, trouble, supervisory, alarm, and reset conditions. They keypad can be used for total system control and programming. In addition, an 80-character alphanumeric liquid crystal display (LCD) annunciator shows programmed device point information. Four keys are dedicated to reset, alarm silence, trouble silence, and drill functions. These panels have two expandable onboard notification appliance circuits, which can be programmed with specific alarm patterns. Models D8024 and D10024A Analog Fire Alarm Control Panels D8024 provides up to 252 analog-addressable devices in standalone system; D10024A up to 630 addressable devices Expandable modular design; capable of networking with other D8024 or D10024A control panels to create a larger system Programmable day-night cycle and device sensitivity levels for smoke and heat detectors Program using front control panel keys or PC software Both models offer optional signal line circuit isolators, remote annunciators, and keypads; D10024A also offers command centers
	The D9124 Alarm Panel is a 127-point addressable sysem that is expandable to 246 addressable points. The panel is programmable for fire, fire supervisory, or intrusion applications directly through the controller or remotely over telephone lines. The panel receives information from alarm initiating points through integrated devices over a two-wire multiplex zone expansion system (zonex). It reports events through custom text displays on the controllers and annunciators. Each addressable point accommodates normally open and/or normally closed devices with End-Of-Line resistor supervision. Events can be reported locally or communicated to a central station by a built-in digital communicator. D9124 Addressable Fire Alarm Control Panel Two supervised onboard notification appliance circuits (NACs) with individual circuit silencing Supports up to 128 off board relay outputs with programmable alarm output options 24 V DC power for sensor and notification alarm circuits 12 V DC, 1.4 A power for accessory devices 16-character fire system controller with custom English text annunciation Up to 8 supervised or 32 unsupervised remote fire annunciators
	The D7024 Addressable Fire Alarm Control Panels can be used in commercial and public building applications such as schools, universities, manufacturing plants, and health care facilities. They are listed by UL for central station, local, auxiliary, and remote station systems. Adding the D7039 Multiplex Expansion modules to the D7024 Conventional FACPs with version 2.02 or higher firmware makes these control panels addressable with up to 255 points. These units support both 2- and 4-wire detectors. Each panel has a built-in digital fire alarm communicator transmitter (DACT) and four on-board detection zones that can be expanded to eight zones. Each zone can support up to 20 two-wire detectors or any number of four-wire detectors (depending on available power). D7024 Addressable Fire Alarm Control Panel Up to 255 addressable points and 58 programmable relay outputs Four detector zones (expandable to eight); up to 20 two-wire smoke detectors per zone Built-in DACT Two NACs on board with internal 24 VDC, 4 A NAC power supply Programmable through front panel interface, remote D7033 fire system keypad, or remote programming software